Welcome to Adamov Reglazing, your trusted partner for bathtub reglazing and cabinet refinishing services in Southern California. We proudly serve residential and commercial clients across multiple locations, helping you revitalize your bathrooms and kitchens with cost-effective, professional solutions.
Looking for bathtub reglazing in Claremont? Adamov Reglazing restores porcelain, cast iron, fiberglass, and acrylic tubs across Claremont and the eastern San Gabriel Valley — ready to use in about 7 hours, backed by a 4-year warranty, with no hidden costs. Reglazing instead of replacing saves thousands of dollars and days of demolition mess.
Claremont has some of the best-preserved older housing in the region — craftsman and Spanish revival homes in the Village and the college neighborhoods, many still with their original cast iron tubs. Those tubs are worth keeping: they’re heavier and better made than current replacements, and in a period home the original fixture belongs there. We restore them in place, no demolition, and we’re often called to strip off a previous owner’s paint job that’s started to peel. There’s also steady rental turnover work here around the Claremont Colleges.
We handle:
A cast iron tub is worth saving. These tubs were built to last for generations, and a lot of them have already outlived two or three remodels around them. The catch is that replacing one is a major undertaking, since cast iron is enormously heavy and awkward to haul out, so when the surface starts looking rough, refinishing is almost always the smarter path. This recent project in Claremont was a good reminder of why.
The tub had been painted at some point in the past. Paint and a proper reglazing coating are not the same thing, and a painted tub tends to give that away over time. On this one, the paint had started peeling and flaking, mostly down on the bottom where water collects and sits. That’s the first place a painted finish fails, and it’s a clear sign the coating was never built to stand up to a working bathtub.
We started by scraping off the peeling and flaking spots, taking the loose material down as far as it would go. Most of that work was concentrated on the bottom, where the failure was worst. From there we sanded the edges of those scraped areas to smooth the transition, so there wouldn’t be any hard lines or lifted spots left to show through the new finish.
Next we dealt with the silicone. We removed the old silicone all the way around the top of the tub, then went along the line between the tile and the tub with a brush to clear out every last bit of remaining silicone hiding in that joint. Old silicone is one of the things a new coating simply won’t bond to, so getting it completely gone is not optional.
Then came a thorough deep cleaning, with extra attention to the spots that needed it most: the edges, the bottom, and especially the area around the drain. The drain had collected a lot of grime and mineral buildup over the years, the kind of hard deposits a quick wipe never touches. We worked all of it off, because any buildup left behind becomes a weak point under the new coating.
With the surface clean, we ran fresh caulk all the way around the top of the tub to seal it properly. We also repaired a couple of chips, one on the surface and one on the side, filling and smoothing them so the finished tub would read as one clean piece.
Before any spraying, we masked off the entire room with paper and plastic to keep overspray to an absolute minimum. Then we set up ventilation, which on a job like this does double duty. It keeps the air clear for a clean finish, and it pulls the fumes out of the house during the spraying process so they aren’t lingering indoors.
Finally, we sprayed the tub with our bright white finish. Over a surface that had been scraped, sanded, stripped of old silicone, deep cleaned, and sealed, the new coating laid down smooth and even. That tired, peeling, painted-over cast iron tub came back looking clean, bright, and as good as new.
That’s the case for refinishing a cast iron tub instead of replacing it. You keep a heavy, high-quality fixture that’s already proven it can last, you skip the labor and expense of tearing it out, and you end up with a surface that looks new.
Every job finishes the same way: we hand over a post-care kit and our cleaning recommendations, so you know exactly how to keep the finish looking sharp. That’s especially worth having on a tub that’s already lost one finish — the right care is a big part of why a proper reglaze lasts years instead of months.
This job was in Claremont, and we cover the neighboring cities just as easily — Pomona, Upland, Montclair, La Verne, and Rancho Cucamonga.
If you’ve got a painted or worn cast iron tub of your own, refinishing is almost always worth a look before you consider replacement. Call (310) 401-4491 for an honest estimate.
For more information you can check out our Blog or FAQ.
